The IntaZero is a unique and effective way to protect a heat pump from the elements.
The IntaZero has been designed and engineered to avoid negative influences from low ambient temperatures by directly positioning the element in the system water flow, permitting accurate system discharge only when it is truly needed.
IntaZero can be used with all brands of heat pump, including; Worcester Bosch, Vaillant, Baxi, and Ideal.
IntaZero will discharge only when the system temperature drops to 3°C. When correctly insulated, IntaZero isn’t affected by ambient temperature.
Building Regulations state that all external fittings should be insulated. IntaZero has an optional pre-cut insulation jacket available, which protects the device from changes in ambient air temperature.
IntaZero’s operating piston has a Nickel & PTFE coating which provides an almost frictionless operation when a system purge is required.
A lower-quality valve may experience increased friction and sticking around the piston. If the piston isn’t able to quickly and smoothly open to release the freezing water, costly system failure is likely to occur. For total reliability, it has to be IntaZero.
When correctly installed you can rely on IntaZero to meet the strict Part L Building Regulations for the UK market.
Building Regulations Part L states that all external pipework on an Air Source Heat Pump System should be fully insulated to reduce heat loss and maintain system efficiency. IntaZero Anti-Freeze Valves will maintain correct operation and discharge the water at the same temperature even when a system is correctly insulated.
The patent pending anti-drip outlet was specially designed to prevent water droplets from freezing and blocking the outlet in the event of a system discharge.
Discharged water is quickly discharged away from the device in such a way that it is not able to freeze in place around the outlet.
The only Anti-Freeze Valve with an optional patented protective debris shield.
The air inlet valve is fully protected from ingress of dust, dirt, leaves and insects to allow air to flow freely and quickly into the valve should the system ever need to purge.
The Inta Zero’s thermostatic element sits directly in the system’s water flow, allowing it to accurately react to the temperature of the system, regardless of ambient temperature. This means the Inta Zero can be fully insulated to help maintain the COP and SCOP of your system without affecting the operation.
Fill in the form and an IntaZero specialist will get back to you.
Designed to be easy to install, our products are made with the highest quality materials and will keep your customer’s heat pump systems working effectively and efficiently.
Intatec is a major supplier to companies that expect to receive quality products and exceptional service.
Our commitment is to manufacture products that can make a difference in efficiency and cost reduction, both now and in the future.
